How it works

• If you do nothing for more than 4.5 seconds
  while installing the alarm, the Rise bracelet automatically returns to the
  time screen. Be sure to take action within 4.5 seconds to continue
  installing the alarm.
• Confirming actions: To confirm each
  setting (such as changing from hours to minutes or saving the set time),
  press and hold the button for 3 seconds.

Can't do it all at
once? No worries, you can simply restart by holding the button again
for 3 seconds when you are on the time screen. Then the hour will start
blinking again.

Turn on your Rise by pressing the button
once. You will now see the time to be adjusted. Press and hold the
button for 3 seconds to start the adjustment process, first the “hour”
indicator will begin to flash. Use the button to set the hour, then
press the button again for 3 seconds to switch to the “minutes.” Repeat
this process to set the minutes, month, day and year. You can also
choose between a 12-hour or 24-hour clock format.

After setting
the time and date, the device will ask you to enter your height and
weight. Hold the button down until the corresponding indicator flashes
and then use the button to adjust these values.

After completing
all settings, do not press any more buttons for 8 seconds; the
Rise will save the data and return to standby mode. Thus, your
device is fully set up and ready to use!

• Alarm Set: To set the alarm
  clock, press the button 5 times to display the first alarm group. If “A1
  OF” is displayed, it means the alarm clock is off by default. To turn
  it on, press and hold the button for 3 seconds. The hour begins to flash
  - press the button to set the hour. Once the hour is set, press and
  hold the button again to switch to the minutes. After setting the
  minutes, press and hold the button again for 3 seconds to save the
  alarm. The alarm is now activated.

Note:
Once you set the alarm clock, it will go off at the same time every day
until you turn it off or adjust it yourself. This is useful if you have a
fixed alarm time; you then only have to set the alarm once.

To set additional alarms, press the button 6, or 7 times to access the other alarm groups and follow the same procedure.

• Alarm off:
  To turn the alarm off, navigate to the set alarm by pressing the button
  the appropriate number of times. Once the alarm is displayed, press and
  hold the button for 3 seconds and then press the button again until “A1
  OF” appears, then press and hold the button for 3 seconds and the alarm
  is turned off again.

To check the battery level of your Rise bracelet, press and hold the button
for 3 seconds while the device is in idle mode. It will then display
the percentage. For more information on charging, scroll down for
charging instructions and watch Dominique's video.